A 25mm wide black, 12 metre pack of both Hook and Loop sides (12 metres of each side) tape with a dry to the touch adhesive on the reverse that can be activated by using heat. This Hook tape from Alfatex® (part of Velcro Companies) has been slit down so that the adhesive runs from edge to edge with no sew-strip, this eliminates the edge from lifting preventing unwanted peel.
Heat reactivable based adhesives are ideal where a more permanent bond is required, they will adhere to suitable surfaces and are exceptionally good on PVC, this Alfatex® tape can also be used on fabrics by ironing to the material using a dry (no steam) hot iron.
- Good resistance to PVC plasticizers.
- Good resistance to high relative humidity and water, can be used indoors and outdoors.
- Very good adhesion to PVC and fabrics.
- Not bondable with metals, aluminium
Important: assure that the application method is suitable for the surface and expected result. Bonding obtained via heat, the minimum activating temperature is 100°C but please avoid temperatures above 200°C, apply pressure in the application state to achieve good bonding it is important to note that the adhesive is not intended for removal and/or re-application. The surfaces must be free of oil, grease, dust, humidity, loose particles and silicone, the surface should also not be too uneven, brittle, soft or unstable. Not suitable for use on elastic fabrics.
SUBSTRATES
HF Weldable Adhesive
Polyethylene (PE, PELD, PEHD)
Suitable
With Reservation
Not Suitable
**Only when activated with solvent.