A 20mm wide VELCRO® brand stick-on loop (softer to the touch) tape with a rubber block high-tack self adhesive pre-applied to the back. PS30 adhesive is ideal for most surfaces, especially suitable for all polylefin substrates including; polyethylen (PE, PELD, PEHD), polypropylen (PP), polycarbonat, methacrylat. Do not use on PVC.
- Strong PS30 Rubber Block Adhesive.
- Simply peel off the backing paper and apply.
- Colour: Loop.
- 20mm Wide x 25m Roll
- MOQ: 10 Rolls
VELCRO® Brand fasteners with high-tack PS30 rubber based adhesive are recommended for smooth surfaces and for indoor use.
Application Instructions:
1. Clean and dry surface before application
2. Peel tape from fastener and press firmly into place
3. Adhesive reaches maximum strength after 24 hours
Note: Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener.
SUBSTRATES
VELCRO® Brand PS30 Adhesive
Polyethylene (PE, PELD, PEHD)
